Napoleon 1150P Wood Gourmet


The Wood Gourmet™ – 1150P Wood Burning Stove is unique, functional, EPA certified and produces lots of warm, comfortable heat with the added benefit of a reliable cook top surface. With up to 55,000 BTU’s, high burn output, large firebox capacity and the reliability of having a combined heating and cooking source without the need for electricity, this stove provides a valuable addition to your home, cottage or both!


Product Information


  • A unique cook stove designed with advanced EPA wood burning technology
  • Solid cast iron cook top surface
  • Fully lined refractory firebox for long burn times and even, consistent heat
  • Convenient wood storage compartment
  • Removable hot plate and lifter with stainless steel gasket to mark “Hot Zones”
  • Flush top design ensures “easy slide” pan movement without having to lift
  • Pot fenders keep the cookware safely on the surface of the stove
  • Easy access ash pan with over sized brushed stainless steel handle
  • Convenient wood storage compartment built right in the pedestal base
  • President’s Limited Lifetime Warranty


Model Wood Gourmet 1150P

BTU’s Heat Output* 11,700 – 42,200

BTU’s High Output (High Burn)** 55,000

Firebox Capacity (cu. ft.) 1.7

Area Heated (sq. ft.)*** 600 – 1,600+

Burn Time (Hours) 7

Log Size (Max) 18″

Emissions(Grams Per Hour) 4.1

Flue Diameter Top 6″

Catalytic Combuster No

Mobile Home Approved No

Blower Kit Available Yes

Installation Clearances Corner 6” Rear 10” Sides 12"

Single wall chimney connector from stove to combustibles 6″ 10″ 12″

With approved double wall pipe from stove to combustibles N/A N/A N/A

Weight Of Bricks 110 lbs.

Weight Without Bricks, Doors or Faceplates 280 lbs.

If the stove is to be installed on a combustible floor, it must be placed on an approved non-combustible hearth pad, that extends 8″ (200mm) beyond the stove sides and back, and 18″ (455mm) to the front. Clearances can be reduced with shielding acceptable to local authorities. Reduced installation must comply with NFPA211 or CAN/CSA-B365. Clearances are unable to be reduced for the 1150 by using double wall pipe.

*EPA (Environmental Protection Agency) rated BTU/h with softwood test fuel (for emissions only) – no refueling. **Wolf Steel Ltd. own test results showing realistic BTU’s using hardwood logs with regular refueling. Heat output will differ on chimney draft as well as type, moisture content and size of wood. ***Figures may vary with individual conditions such as floor plan layout, insulation value/heat loss of the house, geographical location and firewood used.


••••   To view photos in a larger format with a description of the product, click on the photos below.   ••••

Click on this PDF icon to download the brochure for this product. You can also go to the menu bar at the top of this page, select “Media” then “Brochures” and then select the product you want to view.

Copyright © and Messick’s Wood & Coal Stove Shop 2011, 2012, 2013, 2014, 2015, 2016 All Rights Reserved