Napoleon NPS45 Pellet Stove

logo_napoleon

A renewable energy source, environmentally friendly, economical, convenient… these are just some of the reasons a Napoleon® pellet stove is the perfect solution to heat your home. The freestanding stove provides Zone Heating furnace performance and a reliable heating source. The Pellet Stove – NPS45  gives you uncompromising pellet performance year after year with the comfort of knowing you have selected a product made with true craftsmanship and advanced technological innovations.


NPS45

Product Information

PRODUCT FEATURES

  • EPA exempt
  • Convenient top, loading for easy fueling
  • Automatic ignition
  • Stove hopper pellet capacity is 55 lbs (capable of handling a full bag of
    pellets eliminating partial bags left open)
  • Variable speed auger and variable speed blower provide maximum comfort and control
  • Heavy-duty, 1/8” thick, seamless heat exchange tubes radiate heat into the room for maximum efficiency even after the stove is shut down
  • Hinged door for convenient access to combustion chamber for routine maintenance…no tools required!
  • Handy cleaning/filling rake
  • Four stage FAILSAFE™ system features:
    1) an automatic blower over-ride switch
    2) a high temperature limit switch
    3) a low air pressure switch
    4) a power failure safety shut down for your peace of mind
  • Thermostatic control capability via wall mount or easily installed thermostatic remote control
  • Digital control provides adjustment to both the fuel feed rate and combustion blower speed. This unique feature maximizes the stove’s performance when using lesser quality fuel. Even low grade fuel (although not recommended) can be burned in the NPS45 due to its ability to fine tune the fuel combustion air ratio
  • Built-in heat exchange cleaner rod maintains cleanliness and efficiency of heat exchange tubes
  • Effective clean glass airwash system
  • Optional hopper extension allows longer burn times without refilling providing a total loading
    capacity of 80 lbs.
  • Optional outside air kit with through the wall vent
  • Optional decorative ceramic PHAZER® log set
  • President’s Limited Lifetime Warranty

PRODUCT SPECIFICATIONS

Model Pellet Stove – NPS45

BTU’s (Heat Input) 8,500 – 42,500

Hopper Capacity 55 lbs.

Area Heated (sq. ft.)** Up to 2,000

Burn Rate (lbs./hr)* 1-5

Burn Time (Low Burn) Up to 55 hours

Outlet Diameter 3″

Electrical Rating Volts 115 Amps 3.6 Hz 60

Heat Circulating 120 CFM Blower Included

Outside Air Kit Optional

Mobile Home Certified Yes

Blower Kit Available Corner 2” Rear 3” Sides 6″


Certified under Canadian and American Standards.

*Small pellets will increase or decrease the stated burn rates and burn times. Differences of +/- 20% may occur depending on fuel quality.

**Figures may vary with individual conditions such as floor plan layout, insulation value/heat loss of the house and geographical location.

••••   To view photos in a larger format with a description of the product, click on the photos below.   ••••

scale_NPS45


Click on this PDF icon to download the brochure for this product. You can also go to the menu bar at the top of this page, select “Media” then “Brochures” and then select the product you want to view.


Copyright © MessickStove.com and Messick’s Wood & Coal Stove Shop 2011, 2012, 2013, 2014, 2015, 2016 All Rights Reserved