Napoleon NPI45 Pellet Stove Insert

logo_napoleon

With Napoleon’s advanced pellet technology and efficient heat exchanger, the Napoleon® pellet insert will have no problem living up to your “performance” expectations. Napoleon’s pellet insert comes complete with a 120 CFM convection blower system, convenient auto ignitor, airwash system, stylish black trivet and dual painted black accent rods. It is convenient to use, easy to maintain and easy to fillwithout having to “refuel” for up to 45 hours!


npi45_room_napoleon_pellet_insert1-500x500

Product Information

PRODUCT FEATURES

  • EPA exempt
  • Convenient top, loading for easy fueling
  • Automatic ignition
  • Insert hopper pellet capacity is 45 lbs. (capable of handling a full bag of
    pellets eliminating partial bags left open)
  • Variable speed auger and variable speed blower provide maximum comfort and control
  • Heavy-duty, 1/8” thick, seamless heat exchange tubes radiate heat into the room for maximum efficiency even after the insert is shut down
  • Hinged door for convenient access to combustion chamber for routine maintenance…
    no tools required!
  • Handy cleaning/filling rake
  • Four stage FAILSAFE™ system features:
    1) an automatic blower over-ride switch
    2) a high temperature limit switch
    3) a low air pressure switch
    4) a power failure safety shut down for your peace of mind
  • Thermostatic control capability via wall mount or easily installed hand-held thermostatic remote control
  • Digital control provides adjustment to both the fuel feed rate and combustion blower speed. This unique feature maximizes the insert’s performance when using lesser quality fuel. Even low grade fuel (although not recommended) can be burned in the NPI45 due to it’s ability to fine tune the fuel combustion air ratio
  • Built-in heat exchange cleaner rod maintains cleanliness and efficiency of heat exchange tubes
  • Effective clean glass airwash system
  • NPI45 can be top or rear vented and may also be installed as a zero clearance model in a framed cavity, without the use of additional shielding
  • Optional outside air kit with through the wall vent
  • Optional decorative ceramic PHAZER® log set
  • President’s Limited Lifetime Warranty

••••   To view photos in a larger format with a description of the product, click on the photos below.   ••••

PRODUCT SPECIFICATIONS

Model Pellet Insert – NPI45

BTU’s (Heat Input) 8,500 – 42,500

Hopper Capacity 45 lbs.

Area Heated (sq. ft.)** Up to 2,000

Burn Rate (lbs./hr)* 1-5

Burn Time (Low Burn) Up to 45 hours

Outlet Diameter 3

Electrical Rating Volts 115 Amps 3.6 Hz 60

Heat Circulating 120 CFM Blower Included

Outside Air Kit Optional

Mobile Home Certified Yes

Blower Kit Available Height 32 5/8″ Width 14 1/4″ Depth 20 5/8″

Certified under Canadian and American National Standards

*Small pellets will increase or decrease the stated burn rates and burn times. Differences of +/- 20% may occur depending on fuel quality.


**Figures may vary with individual conditions such as floor plan layout, insulation value/heat loss of the house and geographical location.

npi45-flashing-specs
npi45-arched-specs
npi45-cast-specs


Click on this PDF icon to download the brochure for this product. You can also go to the menu bar at the top of this page, select “Media” then “Brochures” and then select the product you want to view.


Copyright © MessickStove.com and Messick’s Wood & Coal Stove Shop 2011, 2012, 2013, 2014, 2015, 2016 All Rights Reserved