Napoleon 1101 Fireplace Insert Stove

logo_napoleon

The 1101 wood burning insert won a prestigious industry award for its unique design, which allows for flush mount or hearth mount installation in either a masonry or factory built fireplace. Featuring an elegantly designed full view single door, standard WHISPER QUIET™ heat circulating blower & thermostatic sensor, this innovative design transforms small amounts of wood into large amounts of cozy heat. Customize your 1101 insert with an optional cast iron surround kit that will enhance your décor.


1101

Product Information

PRODUCT FEATURES

  • Large viewing area through an elegantly arched cast iron door
  • Effective airwash in combination with high temperatures keeps the viewing glass clean
  • Includes WHISPER QUIET™ heat circulating blower
  • Economical 6″ flue assures you of efficiency and cost saving installations
  • Fully refractory lined firebox maintains the interior temperatures necessary to achieve low emissions and complete combustion
  • Cool room air is circulated around the firebox, heated and returned to the room
  • Non-catalytic high tech design eliminates the need for a delicate ceramic catalytic combustor which can deteriorate over time
  • The easy operation of a single lever burn control regulates primary and secondary air establishing a perfect mixture and providing a clean burn.
  • President’s Limited Lifetime Warranty

PRODUCT SPECIFICATIONS

Model 1101 Insert

BTU’s Heat Output* 11,700 – 42,200

BTU’s High Output (High Burn)** 55,000

Firebox Capacity (cu. ft.) 1.7

Area Heated (sq. ft.)*** 600 – 1,600+

Burn Time (Hours) 7

Log Size (Max) 18″

Emissions(Grams Per Hour) 4.1

Flue Diameter Top 6″

Catalytic Combuster No

Mobile Home Approved No

Blower Kit Available Standard

Installation Minimum Fireplace 28 1/2” W. x 22” H. x 16 1/2” D.

Finished Outside 42 1/4” W. x 28 1/8” H..

Weight Of Bricks 110 lbs.

Weight Without Bricks, Doors or Faceplates 185 lbs.

If the stove is to be installed on a combustible floor, it must be placed on an approved non-combustible hearth pad, that extends 8″ (200mm) beyond the stove sides and back, and 18″ (455mm) to the front. Clearances can be reduced with shielding acceptable to local authorities. Reduced installation must comply with NFPA211 or CAN/CSA-B365. Clearances are unable to be reduced for the 1150 by using double wall pipe.

*EPA (Environmental Protection Agency) rated BTU/h with softwood test fuel (for emissions only) – no refueling.

**Wolf Steel Ltd. own test results showing realistic BTU’s using hardwood logs with regular refueling. Heat output will differ on chimney draft as well as type, moisture content and size of wood.

***Figures may vary with individual conditions such as floor plan layout, insulation value/heat loss of the house, geographical location and firewood used.


••••   To view photos in a larger format with a description of the product, click on the photos below.   ••••

Specs_1101


Click on this PDF icon to download the brochure for this product. You can also go to the menu bar at the top of this page, select “Media” then “Brochures” and then select the product you want to view.


Copyright © MessickStove.com and Messick’s Wood & Coal Stove Shop 2011, 2012, 2013, 2014, 2015, 2016 All Rights Reserved